CrazyDrill Flex Steel20 x d, coated
CrazyDrill Flex Steel20 x d, uncoated
CrazyDrill Flex Steel30 x d, coated
CrazyDrill Flex Steel30 x d, uncoated
CrazyDrill Flex Steel50 x d, coated
CrazyDrill Flex Steel50 x d, uncoated
CrazyDrill Flex Titanium30 x d, uncoated
CrazyDrill Flex Titanium50 x d, uncoated
CrazyDrill Flex Titanium ATK30 x d, uncoated
CrazyDrill Flex Titanium ATK50 x d, uncoated
CrazyDrill Flex SST-Inox30 x d, coated
CrazyDrill Flex SST-Inox50 x d, coated
CrazyDrill Flex Titanium ATK50 x d, uncoated
CrazyDrill Flex Steel20 x d, coated
CrazyDrill Flex Steel20 x d, uncoated
CrazyDrill Flex Steel30 x d, coated
CrazyDrill Flex Steel30 x d, uncoated
CrazyDrill Flex Steel50 x d, coated
CrazyDrill Flex Steel50 x d, uncoated
CrazyDrill Flex Titanium30 x d, uncoated
CrazyDrill Flex Titanium50 x d, uncoated
CrazyDrill Flex Titanium ATK30 x d, uncoated
CrazyDrill Flex Titanium ATK50 x d, uncoated
CrazyDrill Flex SST-Inox30 x d, coated
CrazyDrill Flex SST-Inox50 x d, coated
CrazyDrill Flex Titanium ATK 50 x d, uncoated
Diameter range
0.3 mm (.012") - 2.0 mm (.079")
Drilling depth
50 x d
Coating
Uncoated
Cooling
Through-tool cooling
CrazyDrill Flex Titanium ATK for titanium alloys
- Drilling depth 30 x d and 50 x d
- Ø 0.3 – 2.0 mm (.012” - .079”)
- Uncoated
- Cooling: with through-tool coolant
The optimum drilling preparation is guaranteed with CrazyDrill Flexpilot Steel and CrazyDrill Flexpilot Titanium (for CrazyDrill Flex Steel & CrazyDrill Flex Titanium), CrazyDrill Titanium TK (for CrazyDrill Flex Titanium ATK) and CrazyDrill Pilot SST-Inox (for CrazyDrill Flex SST-Inox).
Solid Carbide
Drilling depth 50xd
Tip angle 140°
Teeth number
Internal shaft cooling
Tool without coating
P: Unalloyed and alloyed Steel; M: Stainless Steel; K: Cast iron; N: Non-ferrous metals; S1: Super alloys; S2: Titanium and Titanium alloys; S3: Cr-Co Alloys; H1: Hardened steel <55 HRC; H2: Hardened steel ≥55 HRC;