CrazyDrill Flex Steel20 x d, coated
CrazyDrill Flex Steel20 x d, uncoated
CrazyDrill Flex Steel30 x d, coated
CrazyDrill Flex Steel30 x d, uncoated
CrazyDrill Flex Steel50 x d, coated
CrazyDrill Flex Steel50 x d, uncoated
CrazyDrill Flex Titanium30 x d, uncoated
CrazyDrill Flex Titanium50 x d, uncoated
CrazyDrill Flex Titanium ATK30 x d, uncoated
CrazyDrill Flex Titanium ATK50 x d, uncoated
CrazyDrill Flex SST-Inox30 x d, coated
CrazyDrill Flex SST-Inox50 x d, coated
CrazyDrill Flex Steel20 x d, coated
CrazyDrill Flex Steel20 x d, coated
CrazyDrill Flex Steel20 x d, uncoated
CrazyDrill Flex Steel30 x d, coated
CrazyDrill Flex Steel30 x d, uncoated
CrazyDrill Flex Steel50 x d, coated
CrazyDrill Flex Steel50 x d, uncoated
CrazyDrill Flex Titanium30 x d, uncoated
CrazyDrill Flex Titanium50 x d, uncoated
CrazyDrill Flex Titanium ATK30 x d, uncoated
CrazyDrill Flex Titanium ATK50 x d, uncoated
CrazyDrill Flex SST-Inox30 x d, coated
CrazyDrill Flex SST-Inox50 x d, coated
CrazyDrill Flex Steel 20 x d, coated
Diameter range
0.2 mm (.008") - 1.2 mm (.047"), fractional inches available
Drilling depth
20 x d
Coating
Coated
Cooling
External Cooling
CrazyDrill Flex Steel
- Drilling depth 20, 30 x d, coated: Ø 0.2 – 1.2 mm (.008” - .047”); fractional inches available
- Drilling depth 50 x d, coated: Ø 0.3 – 2.0 mm (.012" - .079"); fractional inches available
- Drilling depth 20, 30 x d, uncoated: Ø 0.1 – 1.2 mm (.004” - .047”); 50 x d: Ø 0.3 - 1.2 mm (.012" - .047")
- Cooling: 20, 30 x d with external cooling, 50 x d with through-tool coolant
The optimum drilling preparation is guaranteed with CrazyDrill Flexpilot Steel and CrazyDrill Flexpilot Titanium (for the versions CrazyDrill Flex Steel & CrazyDrill Flex Titanium), CrazyDrill Titanium TK (for CrazyDrill Flex Titanium ATK) and CrazyDrill Pilot SST-Inox (for CrazyDrill Flex SST-Inox).
Solid Carbide
Drilling depth 20xd
Tip angle 140°
Teeth number
External Cooling
Coating eXedur RIP
P: Unalloyed and alloyed Steel; M: Stainless Steel; K: Cast iron; N: Non-ferrous metals; S1: Super alloys; S2: Titanium and Titanium alloys; S3: Cr-Co Alloys; H1: Hardened steel <55 HRC; H2: Hardened steel ≥55 HRC;