CrazyMill Cool Square - Z2Type A, 1.5 x d
CrazyMill Cool Corner Radius - Z2Type A, 1.5 x d
CrazyMill Cool Square - Z2Type B, 3 x d
CrazyMill Cool Corner Radius - Z2Type B, 3 x d
CrazyMill Cool Square - Z2Type C, 5 x d
CrazyMill Cool Corner Radius - Z2Type C, 5 x d
CrazyMill Cool Square - Z2 Type A, 1.5 x d
Diameter range
0.3 mm (.0118") - 6.35 mm (.250"), fractional inches available
Milling depth
1.5 x d with cutting length 1.5 x d
Coating
Coated
Cooling
Through-tool cooling
CrazyMill Cool Z2 is available in three versions of cylindrical (small protection phase of 45°) and toric (corner radius) milling tools in standard milling sizes of diameter 0.3 – 6.35 mm (.0118” – .250”, fractional inches available): a short one for maximum milling depths of up to 1.5 x d, a medium one up to 3 x d and a long one up to 5 x d. The cutting length for all three is 1.5 x d.
Solid Carbide
Effective length 1.5xd
Square Mill
Teeth number
Helix angle 30°
Internal shaft cooling
Coating eXedur RIP
P: Unalloyed and alloyed Steel; M: Stainless Steel; K: Cast iron; N: Non-ferrous metals; S1: Super alloys; S2: Titanium and Titanium alloys; S3: Cr-Co Alloys; H1: Hardened steel <55 HRC; H2: Hardened steel ≥55 HRC;
Machining direction
Face milling
Side milling
Slot milling
ap = depth feed / ae = lateral feed
Perfect surface quality similar to grinding quality