CrazyMill Cool P&S Square - Z3Type A, 2.5 x d
CrazyMill Cool P&S Corner Radius - Z3Type A, 2.5 x d
CrazyMill Cool P&S Square - Z3Type C, 5 x d
CrazyMill Cool P&S Corner Radius - Z3Type C, 5 x d
CrazyMill Cool P&S Corner Radius - Z3 Type C, 5 x d
Diameter range
1.0 mm (.039") - 8.0 mm (.315"), fractional inches available
Milling depth
5 x d
Coating
Coated
Cooling
Through-tool cooling
CrazyMill Cool P&S square and corner radius, the three-flute plunge-mill with through coolant, which allows vertical plunging with subsequent milling into solid material, is available in diameters from 1 to 8 mm (.039” to .315”, fractional inches available) and in two versions: Type A for maximum milling depth of up to 2.5 x d and Type C for maximum milling depth of up to
5 x d.
For the corresponding choice of tools (diameter) when keyway slotting, see tables “Selection of tools for keyway slotting”.
Solid Carbide
Effective length 5xd
Corner radius mill
Teeth number
Helix angle 42°
Internal shaft cooling
Coating eXedur SNP
Machining direction
Face milling
Side milling
Slot milling
Plunging milling
Pocket milling
Plunging with a linear ramp
ap = depth feed / ae = lateral feed
P: Unalloyed and alloyed Steel; M: Stainless Steel; K: Cast iron; N: Non-ferrous metals; S1: Super alloys; S2: Titanium and Titanium alloys; S3: Cr-Co Alloys; H1: Hardened steel <55 HRC; H2: Hardened steel ≥55 HRC;