CrazyMill Cool Square - Z4Type A, 2 x d
CrazyMill Cool Corner Radius - Z4Type A, 2 x d
CrazyMill Cool Square - Z4Type C, 5 x d
CrazyMill Cool Corner Radius - Z4Type C, 5 x d
CrazyMill Cool Square - Z4Type M, 3 x d
CrazyMill Cool Corner Radius - Z4Type M, 3 x d
CrazyMill Cool Square - Z4Type N, 4 x d
CrazyMill Cool Corner Radius - Z4Type N, 4 x d
CrazyMill Cool Square - Z4Type M, 3 x d
CrazyMill Cool Square - Z4Type A, 2 x d
CrazyMill Cool Corner Radius - Z4Type A, 2 x d
CrazyMill Cool Square - Z4Type C, 5 x d
CrazyMill Cool Corner Radius - Z4Type C, 5 x d
CrazyMill Cool Square - Z4Type M, 3 x d
CrazyMill Cool Corner Radius - Z4Type M, 3 x d
CrazyMill Cool Square - Z4Type N, 4 x d
CrazyMill Cool Corner Radius - Z4Type N, 4 x d
CrazyMill Cool Square - Z4 Type M, 3 x d
Diameter range
1.0 mm (.039") - 8.0 mm (.315"), fractional inches available
Milling depth
3 x d with cutting length 3 x d
Coating
Coated
Cooling
Through-tool cooling
CrazyMill Cool Square (small protection phase of 45°) and Corner radius with four flutes is available in the diameter range from 1.0 up to 8.0 mm (.039“ up to .315“, fractional inches available), each type in four versions: Type A for maximum milling depth up to 2 x d (cutting length 2 x d), Type C up to 5 x d (cutting length 2 x d), Type M up to 3 x d (cutting length 3 x d) and Type N up to 4 x d (cutting length 4 x d).
Solid Carbide
Square Mill
Effective length 3xd
Teeth number
Helix angle 42°
Internal shaft cooling
Coating eXedur SNP
Face milling
Side milling
Pocket milling
Plunging with a linear ramp
ap = depth feed / ae = lateral feed
Machining direction
Perfect surface quality similar to grinding quality
P: Unalloyed and alloyed Steel; M: Stainless Steel; K: Cast iron; N: Non-ferrous metals; S1: Super alloys; S2: Titanium and Titanium alloys; S3: Cr-Co Alloys; H1: Hardened steel <55 HRC; H2: Hardened steel ≥55 HRC;