CrazyMill Cool Micro - Z3Type B, 3 x d - S
CrazyMill Cool Micro - Z3Type B, 3 x d - SX
CrazyMill Cool Micro - Z4Type B, 3 x d - S
CrazyMill Cool Micro - Z4Type B, 3 x d - SX
CrazyMill Cool Micro - Z3Type C, 5 x d - S
CrazyMill Cool Micro - Z3Type C, 5 x d - SX
CrazyMill Cool Micro - Z4Type C, 5 x d - S
CrazyMill Cool Micro - Z4Type C, 5 x d - SX
CrazyMill Cool Micro - Z3Type B, 3 x d - S
CrazyMill Cool Micro - Z3Type B, 3 x d - S
CrazyMill Cool Micro - Z3Type B, 3 x d - SX
CrazyMill Cool Micro - Z4Type B, 3 x d - S
CrazyMill Cool Micro - Z4Type B, 3 x d - SX
CrazyMill Cool Micro - Z3Type C, 5 x d - S
CrazyMill Cool Micro - Z3Type C, 5 x d - SX
CrazyMill Cool Micro - Z4Type C, 5 x d - S
CrazyMill Cool Micro - Z4Type C, 5 x d - SX
CrazyMill Cool Micro - Z3 Type B, 3 x d - S
Diameter range
0.2 mm (.008") - 1.0 mm (.039"), fractional inches available
Milling depth
3 x d (max. milling depth) with cutting length 1.5 x d
Coating
Coated
Cooling
Through-tool cooling
CrazyMill Cool Micro Square (small protection phase of 45°) with three or four flutes is available with two cutting-edge geometries (S and SX) and in a diameter range of 0.2 up to 1.0 mm (.008“ up to .039“) in two versions: Type B for maximum milling depth up to 3 x d (cutting length
1.5 x d) and Type C for milling depth up to 5 x d (cutting length 1.5 x d).
Solid Carbide
Square Mill
Teeth number
Helix angle 35°
Internal Shaft cooling
Coating eXedur SNP
Machining direction
Side milling
Slot milling
Helical interpolation
ap = depth feed / ae = lateral feed
Perfect surface quality similar to grinding quality
P: Unalloyed and alloyed Steel; M: Stainless Steel; K: Cast iron; N: Non-ferrous metals; S1: Super alloys; S2: Titanium and Titanium alloys; S3: Cr-Co Alloys; H1: Hardened steel <55 HRC; H2: Hardened steel ≥55 HRC;